Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

451

452

453

454

455

456

457

458

459

460

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0. Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the S-Series.

7.8.1.0 Introduced on the C-Series.

Usage Information When you enable this command, if a Policy Map containing classication rules (ACL and/or dscp/ ip-precedence

rules) is applied to more than one physical interface on the same port pipe, only a single copy of the policy is

written (only one FP entry is used).

NOTE: An ACL itself may still require more that a single FP entry, regardless of the number of

interfaces. For more information, refer to the “IP Access Control Lists”, “Prex Lists”, and “Route-map”

sections in the

Dell Networking OS Conguration Guide

show cam-acl

Display the details of the CAM proles on the chassis and all stack units.

Syntax

show cam-acl

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.