Service Manual

show ip protocol-queue-mapping
Display the queue mapping for each congured protocol.
Syntax
show ip protocol-queue-mapping
Defaults Not congured.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell# show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort Rate (kbps)
-------- -------- -------- ------- ----- ------ -----------
TCP (BGP) any/179 179/any _ Q9 _ _
UDP (DHCP) 67/68 68/67 _ Q10 _ _
UDP (DHCP-R) 67 67 _ Q10 _ _
TCP (FTP) any 21 _ Q6 _ _
ICMP any any _ Q6 _ _
IGMP any any _ Q11 _ _
TCP (MSDP) any/639 639/any _ Q11 _ _
UDP (NTP) any 123 _ Q6 _ _
OSPF any any _ Q9 _ _
PIM any any _ Q11 _ _
UDP (RIP) any 520 _ Q9 _ _
TCP (SSH) any 22 _ Q6 _ _
TCP (TELNET) any 23 _ Q6 _ _
VRRP any any _ Q10 _ _
Dell#
Control Plane Policing (CoPP) 469