Service Manual

priority-group Enter the keyword priority-group followed by id for specic priority-group or
keyword all.
queue Enter the keyword queue followed by id for specic queue or keyword all.
buer-info To display total buer information for the interface, enter the keywords buffer-info.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, and Z9500.
Example displaying
total-buer
information for the
interface
Dell# show hardware buffer interface tengigabitethernet 1/1 buffer-info
----- Buffer Stats for Interface Te 1/1 -----
Maximum Shared Limit for the Interface: 38336
Default Packet Buffer allocate for the Interface: 120
Used Packet Buffer for the Interface: 0
Example displaying
priority-group range
Dell# show hardware buffer interface tengigabitethernet 1/1 priority-group 0
buffer-info
----- Buffer stats for unit: 0 port: 1 (interface Te 1/1) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
MIN SHARED MODE HDRM MIN SHARED HDRM
------------------------------------------------------------------------
0 - 61440 0 STATIC 174 0 0 0
Dell#
Example displaying
queue range
show hardware buer-stats-snapshot
Displays buer statistics tracking resource information for a specic interface.
Syntax
show hardware buffer-stats-snapshot resource interface interface {{priority-
group {id | all} | queue ucast {id | all} mcast {id | all} | all} [detail]}
Parameters
interface interface
Enter any of the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Debugging and Diagnostics 541