Service Manual

• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.
FIPS mode is enabled or disabled:
• aes256–ctr: Force ssh to use the aes256–ctr encryption cipher.
• aes256–cbc: Force ssh to use the aes128–cbc encryption cipher.
• aes192–ctr: Force ssh to use the aes128–cbc encryption cipher.
• aes192–cbc: Force ssh to use the aes256–cbc encryption cipher.
• aes128–ctr: Force ssh to use the aes256–cbc encryption cipher.
• aes128–cbc: Force ssh to use the aes128–cbc encryption cipher.
• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.
-l username (OPTIONAL) Enter the keyword —l then the user name used in this SSH session. The
default is the user name of the user associated with the terminal.
-m HMAC algorithm Enter one of the following HMAC algorithms to use. (For v2 clients only.):
Without the FIPS mode enabled:
• hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
• hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
• hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
• hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
With the FIPS mode enabled:
• hmac-sha2-256: Force ssh to use the hmac-sha2-256 HMAC algorithm.
• hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
• hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
• hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
• hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
-p port-number (OPTIONAL) Enter the keyword —p then the port number.
The range is 1 to 65535.
-v {1|2} (OPTIONAL) Enter the keyword —v then the SSH version 1 or 2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not display in the output.
Defaults See Parameters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Removed the support for hmac-sha2-256-96 algorithm.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
FIPS Cryptography 595