Service Manual

FIP Snooping

In a converged Ethernet network, a switch can operate as an intermediate Ethernet bridge to snoop on FIP packets during the login

process on Fibre Channel over Ethernet (FCoE) forwarders (FCFs). Acting as a transit FIP snooping bridge, the switch uses dynamically

created access control lists (ACLs) to permit only authorized FCoE trac to transmit between an FCoE end-device and an FCF.

clear p-snooping database interface vlan

Clear FIP snooping information on a VLAN for a specied FCoE MAC address, ENode MAC address, or FCF MAC address, and remove the

corresponding ACLs FIP snooping generates.

Syntax

clear fip-snooping database interface vlan {vlan-id} enode {enode-mac-address}

| fcf {fcf-mac-address} | session {session-mac-address}

Parameters

enode-mac-

address

Enter the ENode MAC address to be cleared of FIP snooping information.

fcf-mac-address Enter the FCF MAC address to be cleared of FIP snooping information.

session-mac-

address

Enter the MAC address for the session to be cleared of FIP snooping information.

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the Z9500 and S6000-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

FIP Snooping 597