Service Manual
Force10 Resilient Ring Protocol (FRRP)
FRRP is a proprietary protocol for that oers fast convergence in a Layer 2 network without having to run the spanning tree protocol
(STP). The resilient ring protocol is an ecient protocol that transmits a high-speed token across a ring to verify the link status. All the
intelligence is contained in the master node with practically no intelligence required of the transit mode.
Important Points to Remember
• FRRP is media- and speed-independent.
• FRRP is a Dell Networking proprietary protocol that does not interoperate with any other vendor.
• Spanning Tree must be disabled on both primary and secondary interfaces before Resilient Ring protocol is enabled.
• A VLAN congured as the control VLAN for a ring cannot be congured as a control or member VLAN for any other ring.
• Member VLANs across multiple rings are not supported in Master nodes.
• If multiple rings share one or more member VLANs, they cannot share any links between them.
• Each ring can have only one Master node; all others are Transit nodes.
Topics:
• clear frrp
• debug frrp
• description
• disable
• interface
• member-vlan
• mode
• protocol frrp
• show frrp
• timer
clear frrp
Clear the FRRP statistics counters.
Syntax
clear frrp [ring-id]
Parameters
ring-id (Optional) Enter the ring identication number. The range is from 1 to 255.
Defaults None
Command Modes EXEC
18
Force10 Resilient Ring Protocol (FRRP) 611