Service Manual

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series

Usage Information You must include the colon (:) when entering this command.

After reformatting is complete, three empty directories are automatically created on ash: CRASH_LOG_DIR,

TRACE_LOG_DIR and NVTRACE_LOG_DIR.

CAUTION: This command deletes all les, including the startup conguration le. So, after executing

this command, consider saving the running cong as the startup cong (use the write memory

command or copy running-config startup-config command).

Related Commands

• copy – copy the current conguration to either the startup-conguration le or the terminal.

• show le-systems – display information about the le systems on the system.

fsck ash

Checks the ash le system for errors.

Syntax

fsck {flash: | usbflash:}

Parameters

ash:

For a directory on the internal Flash, enter flash:// directory name.

usbash:

For a directory on the external USB ash, enter usbflash:// directory name.

Defaults None