Service Manual

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.1(0.0) Introduced on S4810 and Z9000.
8.3.19.0 Introduced on S4820T.
Usage Information Include the colon (:) when entering this command. This command checks the specied ash memory for errors. If
errors are found, the command recommends that you format the ash.
CAUTION: If you elect to format the ash, all les – including the startup conguration le – are lost. If
you do decide to format the specied ash, consider saving the running conguration as the startup
conguration after formatting the ash (use the write memory command or copy running-
config startup-config command).
Related Commands
• copy — copy one le to another location.
• show le-systems — display information about the le systems on the system.
mkdir
Creates a directory on the NFS mounted le system.
Syntax
mkdir nfsmount://mount-point/usrname
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Example
Dell# mkdir nfsmount:/nfs-mountpoint/guest
Dell#
Related Commands
• rmdir — remove a directory.
mount nfs
Mounts an NFS le system to a device.
Syntax
mount nfs rhost:path mount-point [username password]
Parameters
Enter the following location keywords and information:
File Management 67