Service Manual

ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related Commands
• show interfaces congured – display any interface with a non-default conguration.
• show inventory (S-Series and Z-Series) – display the S-Series and Z-Series switch types, components
(including media), Dell Networking OS version including hardware identication numbers, and congured
protocols.
• show ip interface – display Layer 3 information about the interfaces.
• show range – display all interfaces congured using the interface range command.
show interfaces congured
Display any interface with a non-default conguration.
Syntax
show interfaces configured
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.4.1.0 Changed the organization of the display output.
Example
Dell# show interfaces configured
TenGigabitEthernet 1/18 is up, line protocol is up
Hardware is Force10Eth, address is 00:01:e8:05:f7:fc
712 Interfaces