Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

771

772

773

774

775

776

777

778

779

780

Parameters

name Enter the name of the host to delete. Enter * to delete all host table entries.

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

clear ip b stack-unit

Clear all FIB entries in the specied stack unit (use this command with caution, refer to Usage Information.)

Syntax

clear ip fib stack-unit unit-number vrf vrf-name

Parameters

unit-number Enter the number of the stack unit.

vrf vrf-name Enter the keyword vrf followed by the name of the VRF to clear all FIB entries

corresponding to that VRF.