Service Manual

Control and Monitoring

This section contains command information to congure and monitor the system, including Telnet, le transfer protocol (FTP), and trivial

le transfer protocol (TFTP).

asf-mode

Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.

Syntax

asf-mode stack-unit {unit-id | all} queue size

To return to standard Store and Forward mode, use the no asf-mode command.

Parameters

unit-id

Enter the stack member unit identier of the stack member to reset. The range is from 1 to 6.

queue size Enter the queue size of the stack member. The range is from 0 to 15.

unit-id Enter the stack member unit identier of the stack member to reset. The range is from 1 to 6.

queue size Enter the queue size of the stack member. The range is from 0 to 15.

Defaults

Not congured

Command Modes

CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking OS Command Line

Reference Guide.

Version

Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

86 Control and Monitoring