Service Manual

TCP Port Target IP Address
3260
860
Related Commands
• show iscsi session — display information about active iSCSI sessions on the switch.
• show iscsi session detailed — display detailed information about active iSCSI sessions on the switch.
• show run iscsi — show run iscsi.
show iscsi session
Display information about active iSCSI sessions on the switch.
Syntax
show iscsi session
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Example
Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage Information
Only sessions the switch observes are learned; sessions owing through an adjacent switch are not learned.
After the switch is reloaded, any information exchanged during the initial handshake is not available. If the switch
picks up the communication after reloading, it would detect a session was in progress but could not obtain
complete information for it. Any incomplete information of this type would not be available in the show commands.
Related Commands
• show iscsi — display the currently congured iSCSI settings.
• show iscsi session detailed — display detailed information about active iSCSI sessions on the switch.
• show run iscsi — show run iscsi.
872 iSCSI Optimization