Service Manual

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Related Commands
• distribute-list out — suppress networks from being advertised in updates.
• redistribute — redistribute routes from one routing domain to another routing domain.
distribute-list out
Suppress network prexes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number | ospf process-
id | rip | static]
To return to the default values, use the no distribute-list prefix-list-name out [bgp as
number connected | ospf process-id | rip | static] command.
Parameters
prex-list-name Specify the prex list to lter prexes in routing updates.
connected (OPTIONAL) Enter the keyword connected for directly connected routing process.
ospf process-id (OPTIONAL) Enter the keyword ospf then the OSPF process-ID number. The range is
from 1 to 65535.
bgp as number (OPTIONAL) Enter the BGP then the AS Number. The range is from 1 to 65535.
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-congured routing process.
Defaults Not congured.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
890 Intermediate System to Intermediate System (IS-IS)