Service Manual

To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2 Enter the keywords level-1 or level-2 to identify the database instance type to
which the wait interval applies.
seconds Enter the gracefule-restart t2 time in seconds. The range is from 5 to 120
seconds. The default is 30 seconds.
Defaults 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
graceful-restart t3
Congure the overall wait time before graceful restart completes.
Syntax
graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
Parameters
adjacency Enter the keyword adjacency so that the restarting router receives the remaining time
value from its peer and adjusts its T3 value so if you have congured this option.
manual Enter the keyword manual to specify a time value that the restarting router uses. The
range is from 50 to 120 seconds. The default is 30 seconds.
Defaults manual, 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
896 Intermediate System to Intermediate System (IS-IS)