Service Manual
Dell#
Related Commands
• show mac-address-table — display the current MAC address conguration.
show mac accounting destination
Display destination counters for Layer 2 trac (available on physical interfaces only).
Syntax
show mac accounting destination [mac-address vlan vlan-id] [interface interface
[mac-address vlan vlan-id] [vlan vlan-id]] [vlan vlan-id]
Parameters
mac-address (OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface then the interface type, slot and port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port
[/subport] information.
•
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address
assigned to the VLAN. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
pre-6.2.1.1 Introduced on the E-Series.
Usage Information MAC Accounting information can be accessed using SNMP via the Force10 Monitor MIB. For more information
about enabling SNMP, refer to the Dell Networking OS Conguration Guide.
Layer 2 961