Users Guide
Figure 32. PFC and ETS Applied to LAN, IPC, and SAN Priority Trac
QoS Trac Classication: The service-class dynamic dot1p command has been used in Global Conguration mode to map
ingress dot1p frames to the queues shown in the following table. For more information, refer to
QoS dot1p Trac Classication and Queue
Assignment.
The following describes the dot1p-priority class group assignment
dot1p Value in
the Incoming
Frame
Priority Group Assignment
0 LAN
1 LAN
2 LAN
3 SAN
4 IPC
Data Center Bridging (DCB) 307