Reference Guide
Static MAC Address
A static MAC address entry is one that you manually congure. A static entry is not subject to aging.
• Create a static MAC address entry in the MAC address table in CONFIGURATION mode.
mac-address-table static nn:nn:nn:nn:nn vlan vlan-id interface [ethernet node/slot/
port[:subport]
| port-channel channel-number]
Set Static MAC Address
OS10(config)# mac address-table static 34:17:eb:f2:ab:c6 vlan 10 interface ethernet 1/1/5
MAC Address Table
OS10 maintains a list of MAC address table entries.
• View the contents of the MAC address table in EXEC mode.
show mac address-table {dynamic | static} [address mac-address | vlan vlan-id | interface
{ethernet node/slot/port[:subport] | port-channel number}] [count [vlan vlan-id] [interface
{type node/slot/port[:subport] | port-channel number}]
• dynamic — (Optional) Displays dynamic MAC address table entry information.
• static — (Optional) Displays static MAC address table entry information.
• address mac-address — (Optional) Displays MAC address information.
• interface ethernet node/slot/port[:subport] — (Optional) Displays a list of dynamic and static MAC address
entries.
• interface port-channel number — (Optional) Displays port channel information (1 to 128).
• count — (Optional) Displays the number of dynamic and static MAC address entries.
• vlan vlan-id — (Optional) Displays information for a specied VLAN only (1 to 4094).
View MAC Address Table Entries
OS10# show mac address-table
VlanId Mac Address Type Interface
1 00:00:15:c6:ca:49 dynamic ethernet1/1/21
1 00:00:20:2a:25:55 dynamic ethernet1/1/21
1 90:b1:1c:f4:aa:ce dynamic ethernet1/1/21
1 90:b1:1c:f4:aa:c6 dynamic ethernet1/1/21
10 34:17:eb:02:8c:33 static ethernet1/1/1
View MAC Address Table Count
OS10# show mac address-table count
MAC Entries for all vlans :
Dynamic Address Count : 4
Static Address (User-defined) Count : 1
Total MAC Addresses in Use: 5
Clear MAC Address Table
You can clear dynamic address entries that are maintained in the MAC address table.
• Clear the MAC address table of dynamic entries in EXEC mode.
clear mac address-table dynamic [[all] [address mac_addr] [vlan vlan-id] [interface {ethernet
type node/slot/port[:subport] | port-channel number}]
164
Layer 2