Reference Guide
DNS commands
OS10 supports the conguration of a DNS host and domain parameters.
ip domain-list
Adds a domain name to the DNS list. This domain name appends to incomplete hostnames in DNS requests.
Syntax
ip domain-list [server-name] name
Parameters
• server-name — (Optional) Enter the server name to add a domain name to the DNS list.
• name — Enter the name of the domain to append to the DNS list.
Default Not congured
Command Mode CONFIGURATION
Usage Information There is a maximum of six domain names to the DNS list. Use this domain name to complete unqualied host
names. The no version of this command removes a domain name from the DNS list.
Example
OS10(config)# ip domain-list jay dell.com
Supported Releases 10.2.0E or later
ip domain-name
Congures the default domain and appends to incomplete DNS requests.
Syntax
ip domain-name server-name
Parameters server-name — (Optional) Enter the server name the default domain uses.
Default Not congured
Command Mode CONFIGURATION
Usage Information This domain appends to incomplete DNS requests. The no version of this command returns the value to the
default.
Example
OS10(config)# ip domain-name jay dell.com
Supported Releases 10.2.0E or later
ip host
Congures mapping between the host name server and the IP address.
Syntax
ip host [host-name] address
Parameters
• host-name — (Optional) Enter the name of the host.
• address — Enter an IPv4 or IPv6 address of the name server in A.B.C.D or A::B format.
System management 371