Reference Guide

Parameters value — Enter the authentication key value known both to the RADIUS client and server.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# radius-server key md5
Supported Releases 10.2.0E or later
radius-server retransmit
Congures the number of attempts to retry the RADIUS server.
Syntax
radius-server retransmit retries
Parameters retries — Enter the number of retry attempts (0 to 100).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# radius-server retransmit 50
Supported Releases 10.2.0E or later
radius-server timeout
Congures the timeout for RADIUS server retransmission.
Syntax
radius-server timeout number
Parameters number — Enter the time in seconds for retransmission (0 to 1000).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# radius-server timeout 360
Supported Releases 10.2.0E or later
show ip ssh
Displays the SSH server information.
Syntax
show ip ssh
Parameters None
Default Not congured
Command Mode EXEC
System management 395