Reference Guide
Eth 1/1/13 up 40G A 1 -
Eth 1/1/14 up 40G A 1 -
Eth 1/1/15 up 40G A 1 -
Eth 1/1/16 up 40G A 1 -
Eth 1/1/17 up 40G A 1 -
Eth 1/1/18 up 40G A 1 -
Eth 1/1/19 up 40G A 1 -
Eth 1/1/20 up 40G A 1 -
Eth 1/1/21 up 40G A 1 -
Eth 1/1/22 up 40G A 1 -
Eth 1/1/23 up 40G A 1 -
Eth 1/1/24 up 40G A 1 -
Eth 1/1/25 up 40G A 1 -
Eth 1/1/26 up 40G A 1 -
Eth 1/1/27 up 40G A 1 -
Eth 1/1/28 up 40G A 1 -
Eth 1/1/29 up 40G A 1 -
Eth 1/1/30 up 40G A 1 -
Eth 1/1/31 up 40G A 1 -
Eth 1/1/32 up 40G A 1 -
--------------------------------------------------------------------------------
OS10# configure terminal
OS10(config)# alias goint "interface ethernet $1"
OS10(config)# goint 1/1/1
OS10(conf-if-eth1/1/1)#
Supported Releases 10.3.0E or later
batch
Executes a series of commands in a le in batch (non-interactive) processing.
Syntax
batch filename
Parameters filename — Enter the name of a batch command le.
Default Not congured
Command Mode EXEC
Usage Information Use this command to create a batch command le on a remote machine. Copy the command le to your switch
(for example, to your home directory). Enter the batch command to execute commands in the le in batch mode.
OS10 automatically commits all commands in a batch le; you do not have to enter the commit command. To
display the les stored in the home directory, enter
dir home. Use the dir home command to view the les
stored in the home directory.
Example
OS10# batch b.cmd
OS10# Feb 15 19:26:1: %Dell EMC (OS10) %Node.1-Unit.1:PRI:OS10 %log-
notice:IP_ADDRESS_ADD: IP Address add is successful.:IP 172.17.4.1/24 added
successful
Supported Releases 10.2.0E or later
boot
Congures which OS10 image to use the next time the system boots up.
Syntax
boot system [active | standby]
42 Getting Started