Reference Guide
Example
OS10(config)# show port-group
port-group mode ports
1/1/1 Eth 10g-4x 1 2 3 4
1/1/2 FC 16g-2x 5 6 7 8
1/1/3 FC 16g-2x 9 10 11 12
1/1/4 FC 16g-2x 13 14 15 16
1/1/5 FC 16g-2x 17 18 19 20
1/1/6 FC 16g-2x 21 22 23 24
1/1/7 Eth 100g-1x 25
1/1/8 Eth 40g-1x 26
1/1/9 Eth 100g-1x 29
1/1/10 Eth 40g-1x 30
Supported Releases 10.3.1E or later
show switch-port-prole
Displays the current and default port prole on a switch.
Syntax
show switch-port-profile node/slot
Parameters
• node/slot — Enter the switch information. For a standalone switch, enter 1/1.
Default
profile-1
Command Mode EXEC
Usage Information A switch-port prole determines the available front-panel ports and breakout modes on Ethernet and unied ports.
To display the current port prole, enter the show switch-port-profile command. To reset the switch to
the default port prole, enter the no switch-port-profile node/slot command.
Example
OS10(config)# show switch-port-profile 1/1
| Node/Unit | Current | Next-boot | Default |
|-------------+-------------------+-------------------|
| 1/1 | profile-2 | profile-2 | profile-1 |
Supported Profiles:
profile-1
profile-2
profile-3
profile-4
profile-5
profile-6
Supported Releases 10.3.1E or later
show vlan
Displays the current VLAN conguration.
Syntax
show vlan [vlan-id]
Parameters vlan-id — (Optional) Enter a VLAN ID (1 to 4094).
Default Not congured
Command Mode EXEC
96 Interfaces