Users Guide

● For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information.
● For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
● For a port channel interface, enter the keywords port-channel then a
number.
Defaults None.
Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping querier
Enable the MLD querier processing for the VLAN interface.
Syntax
ipv6 mld snooping querier
To disable the querier feature, use the no ipv6 mld snooping querier command.
Defaults Disabled
Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
show ipv6 mld snooping groups
Display the IPv6 MLD snooping group information.
Syntax
show ipv6 mld snooping groups [group address] [summary] [interface
interface [detail]]
Parameters
group-address (Optional) Enter the multicast group addresss in the X:X:X:X::X format. The ::
notation specifies successive hexadecimal fields of zero.
summary (OPTIONAL) Enter the keyword summary to display a summary of groups.
interface
interface
Enter the following keywords and slot/port or number information:
● For a Port Channel interface, enter the keywords port-channel then a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
Multicast Listener Discovery Protocol 1027