Users Guide

Multiple Spanning Tree Protocol (MSTP)
Multiple spanning tree protocol (MSTP), as implemented by the Dell EMC Networking OS, conforms to IEEE 802.1s.
This command supports the Dell EMC Networking OS.
Topics:
• debug spanning-tree mstp
• disable
• forward-delay
• hello-time
• max-age
• msti
• name
• protocol spanning-tree mstp
• revision
• show config
• show spanning-tree mst configuration
• show spanning-tree msti
• spanning-tree
• spanning-tree msti
• tc-flush-standard
debug spanning-tree mstp
Enable debugging of the multiple spanning tree protocol and view information on the protocol.
Syntax
debug spanning-tree mstp [all | bpdu interface {in | out} | events]
To disable debugging, enter no debug spanning-tree mstp
Parameters
all (OPTIONAL) Enter the keyword all to debug all spanning tree operations.
bpdu interface
{in | out}
(OPTIONAL) Enter the keyword bpdu to debug bridge protocol data units (BPDU).
(OPTIONAL) Enter the interface keyword along with the type slot/port of the
interface you want displayed. Type slot/port options are the following:
● For a port channel interface, enter the keywords port-channel then a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Optionally, enter an in or out parameter with the optional interface:
● For Receive, enter the keyword in.
● For Transmit, enter the keyword out.
events (OPTIONAL) Enter the keyword events to debug MSTP events.
Command Modes EXEC Privilege
36
1030 Multiple Spanning Tree Protocol (MSTP)