Users Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Example
DellEMC# show qos wred-profile
Global Wred State: Disabled
Wred-profile-name min-threshold max-threshold max-drop-rate
wred_drop 0 0 100
wred_teng_y 467 4671 100
wred_teng_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25
DellEMC#
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
S4048–ON
Syntax
test cam-usage service-policy input policy-map stack-unit {[number port-set
portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-
unit number
(OPTIONAL) Enter the keyword stack-unit then the stack-unit slot number.
port-set portpipe
number
Enter the keywords port-set then the stack-unit port pipe number. The range is
from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all stack-unit.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
1308 Quality of Service (QoS)