Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1421

Table Of Contents

To delete a group of TACACS servers, use the no tacacs-server group group-name command

Parameters

group-name

Enter the name of the TACACS server group.

Defaults Not configured.

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.4.(0.0) Introduced on the S-Series and Z-Series.

Usage

Information

If the TACACS group is not configured for Authentication, Authorization, and Accounting, then globally

configured TACACS servers are used for the purposes. When the TACACS group is removed, the AAA

configuration is also removed.

Example

Commands

● aaa authentication login — specifies the login authentication method.

● tacacs-server key — configures a TACACS+ key for the TACACS server.

debug tacacs+

To assist with troubleshooting, view TACACS+ transactions.

Syntax