Users Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage
Information
The retry interval value caps at the value configured on the max-backoff.
Related
Commands
vxlan-instance — Enable VXLAN Instance configuration on the platform.
peer-ovsdbserver-ip
Specify the IP address of the peer OVSDB server in a VLT setup.
Syntax
peer-ovsdbserver-ip peer-ip-address
To remove the configuration, use the no peer-ovsdbserver-ip
Parameters
peer-ip-address Enter the peer OVSDB server IP address. This is usually the management IP
address of the peer VLT device.
Defaults Not configured
Command Modes VXLAN-INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S6000, S6000–ON, S6010-ON, S4048-ON, S4048T-ON,
S5048F-ON, S6100-ON, and Z9100-ON.
remote-vtep-ip
Create a remote VTEP and associate it to specified VNIDs.
Syntax
remote—vtep—ip IP Address vni-profile profile name
To delete the remote VTEP, use the no remote—vtep—ip command.
Parameters
IP Address Enter the IP Address of the remote VTEP.
vni-profile Enter the keyword vni-profile followed by the profile name to which the
remote VTEP has to be associated.
Defaults None.
Command Modes VXLAN-INSTANCE
Virtual Extensible LAN (VXLAN) 1713