Users Guide

7 No - - - -
- Denotes dynamic buffering is enabled in respective queues
On interface in which PFC is not enabled:
DellEMC#show interface tengigabitethernet 1/20 pfc buffer-threshold
The following table describes the output fields displayed for the show interface pfc buffer-
threshold command:
Field Description
queue Number of the queue
lossless Whether the queue is a lossy or lossless queue for which buffer threshold is
configured
buffer-size Ingress buffer size
pause-threshold-
value
Buffer limit at which the port sends the pause to peer in KB.
resume-
threshold-value
Buffer offset limit at which the port resumes the peer in KB.
shared threshold
weight
Weightage of the priorities on the shared buffer size in the system.
service-class buffer shared-threshold-weight
Create a service class and associate the threshold weight of the shared buffer with each of the queues per port in the egress
direction.
Syntax
[No] Service-class buffer shared-threshold-weight {[queue0 number] ||
[queue1 number] || [queue2 number] || [queue3 number] || [queue4 number] ||
[queue5 number] || [queue6 number] || [queue7 number]}
Parameters
buffer Define the shared buffer settings
shared-
threshold-weight
Specify the weight of a queue for the shared buffer space
queue 0 to queue
7
To apply the shared-threshold weight, specify the queue number
number Enter a weight for the queue on the shared buffer as a number in the range of 1 to
11.
Default The default threshold weight on the shared buffer for each queue is 9. Therefore, each queue can
consume up to 66.67 percent of available shared buffer by default.
Command Modes INTERFACE mode
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.9(0.0) Introduced on the Z9500, S4810, S4820T, S5000, and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000.
522 Data Center Bridging (DCB)