Users Guide

● xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor8
● xor16: Use CR16 — 16 bit XOR
hg { crc16
| crc16cc |
crc32MSB |
crc32LSB | xor1 |
xor2 | xor4 | xor8
| xor16 }
Enter the keyword hg then one of the following options available in the stack-unit
and linecard provisioned devices:
● crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync polynomial (default)
● crc16cc: Use CRC16_CCITT — 16 bit CRC16 using CRC16-CCITT polynomial
● crc32MSB: Use CRC32_UPPER — MSB 16 bits of computed CRC32
● crc32LSB: Use CRC32_LOWER — LSB 16 bits of computed CRC32
● xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor1
● xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor2
● xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor4
● xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor8
● xor16: Use CR16 — 16 bit XOR
lag { crc16
| crc16cc |
crc32MSB |
crc32LSB | xor1 |
xor2 | xor4 | xor8
| xor16 }
Enter the keyword hg then one of the following options available in the stack-unit
and linecard provisioned devices::
● crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync polynomial (default)
● crc16cc: Use CRC16_CCITT — 16 bit CRC16 using CRC16-CCITT polynomial
● crc32MSB: Use CRC32_UPPER — MSB 16 bits of computed CRC32
● crc32LSB: Use CRC32_LOWER — LSB 16 bits of computed CRC32
● xor1: Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor1
● xor2: Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor2
● xor4: Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor4
● xor8: Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and
lower 8 bits of xor8
● xor16: Use CR16 — 16 bit XOR
hg-seed seed-
value
(This option is available in stack-unit and linecard provisioned devices): Enter the
keywords hg-seed then the hash algorithm seed value. The range is from 0 to
2147483646.
stack-unit
number
(OPTIONAL) : Enter the keyword stack-unit then the stack-unit slot number.
linecard number
(OPTIONAL) : Enter the keyword linecard then the linecard slot number.
port-set number
(OPTIONAL) Enter the keyword port-set then the port-set slot number.
Defaults IPSA and IPDA mask value is FF for the stack-unit.
Command Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
Equal Cost Multi-Path (ECMP) 591