Users Guide

Source address : 1.1.1.1
Source mask : /32
Source port : 0
Destination address : 1.1.1.2
Destination mask : /32
Destination port : 23
source-interface name :
source-interface num :
DellEMC(conf-crypto-policy)#
transform-set
Specify the transform set the crypto policy uses.
Syntax
transform-set transform-set-name
To delete a transform set from the crypto policy, use the no transform-set transform-set-
name command.
Parameters
transform-set-
name
Enter the name for the crypto policy transform set.
Defaults None
Command Modes CONFIG-CRYPTO-POLICY
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
9.2(1.0) Introduced on the Z9500.
Internet Protocol Security (IPSec) 761