Users Guide

NOTE: If you do not specify this option, IPv6 CAM entries corresponding to
the default VRF are displayed.
unit-number Enter the stack unit’s ID number.
port-set Enter the keyword Port Set.
summary (OPTIONAL) Enter the keyword summary to display a table listing network
prefixes and the total number prefixes which can be entered into the IPv6 CAM.
index (OPTIONAL) Enter the index in the IPv6 CAM.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have
more specific prefixes. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage
Information
NOTE: If a route has a mask greater than 64, no output is displayed and no output is displayed
for show ipv6 cam stack-unit unit-number port-set {0-1} ipv6-address, but
an equivalent /64 entry would be listed in the show ipv6 cam stack-unit unit-number
port-set {0-1} output. Similarly, if there is more than one ECMP object with a destination route
that has a mask greater than 64, if the first 64 bits in the destination routes of the ECMP objects are
the same, only one route is installed in CAM even though multiple ECMP path entries exist.
NOTE: The self address is displayed in the neighbor portion for the show ipv6 cam stack-unit
unit-number port-set command.
show ipv6 control-plane icmp
Displays the status of the icmp control-plane setting for the error eate limit setting.
Syntax
show ipv6 control-plane icmp
Default 100
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant DellEMC
Networking OS Command Line Reference Guide.
850 IPv6 Basics