Service Manual

3. Create VXLAN Gateway
To create a VXLAN L2 Gateway, the IP address of the Gateway is mandatory. The following is the
snapshot of the user interface in creating a VXLAN Gateway
4. Create Logical Switch
You can create a logical network by creating a logical switch. The logical network acts as the
forwarding domain for workloads on the physical as well as virtual infrastructure.
5. Create Logical Switch Port
A logical switch port provides a logical connection point for a VM interface (VIF) and a L2 gateway
connection to an external network. It binds the virtual access ports in the GW to logical network
(VXLAN) and VLAN.
NOTE: For more details about NVP controller configuration, refer to the NVP user guide from
VMWare .
1062
Virtual Extensible LAN (VXLAN)