Service Manual

space. Enable optimization using the optimized option in the ip access-group command. This
option is not valid for VLAN and link aggregation group (LAG) interfaces.
Configuring ACL VLAN Groups and Configuring FP Blocks
for VLAN Parameters
This section describes how to optimize CAM blocks by configuring ACL VLAN groups that you can attach
to VLAN interfaces. It also describes how to configure FP blocks for different VLAN operations.
Configuring ACL VLAN Groups
You can create an ACL VLAN group and attach the ACL with the VLAN members. The optimization is
applicable only when you create an ACL VLAN group.
1. Create an ACL VLAN group.
CONFIGURATION mode
acl-vlan-group {group name}
You can have up to eight different ACL VLAN groups at any given time.
2. Add a description to the ACL VLAN group.
CONFIGURATION (conf-acl-vl-grp) mode
description description
3. Apply an egress IP ACL to the ACL VLAN group.
CONFIGURATION (conf-acl-vl-grp) mode
ip access-group {group name} out implicit-permit
4. Add VLAN member(s) to an ACL VLAN group.
CONFIGURATION (conf-acl-vl-grp) mode
member vlan {VLAN-range}
5. Display all the ACL VLAN groups or display a specific ACL VLAN group, identified by name.
CONFIGURATION (conf-acl-vl-grp) mode
show acl-vlan-group {group name | detail}
Dell#show acl-vlan-group detail
Group Name :
TestGroupSeventeenTwenty
Egress IP Acl :
SpecialAccessOnlyExpertsAllowed
Vlan Members :
100,200,300
Group Name :
CustomerNumberIdentificationEleven
Egress IP Acl :
AnyEmployeeCustomerElevenGrantedAccess
Vlan Members :
2-10,99
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
121