Administrator Guide

Configuring and Controling VXLAN from Nuage
Controller GUI
The Dell EMC Networking OS supports Nuage controller for VXLAN. You can configure and control VXLAN from the Nuage controller
GUI, by adding a hardware device to the Nuage controller and authenticating the device.
1. Under the Infrastructure tab, add a datacenter gateway.
Figure 164. Add Data center Gateway
2. Create port-to-VLAN mappings.
Figure 165. Port-to-VLAN mappings
3. Under the Networks tab, create an L2 domain. Under the L2 domain, create a logical network (VNI) and add access ports of the VTEP
in the logical network.
Figure 166. Access ports of the VTEP
Virtual Extensible LAN (VXLAN)
1015