Service Manual

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
distribute-list out
To restrict certain routes destined for the local routing table after the SPF calculation, apply a filter.
S4048–ON
Syntax
distribute-list prefix-list-name out [bgp | connected | isis |
rip | static]
To remove a filter, use the no distribute-list prefix-list-name out
[bgp | connected | isis | rip | static] command.
Parameters
prefix-list-name Enter the name of a configured prefix list.
bgp (OPTIONAL) Enter the keyword bgp to specify that BGP
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
connected (OPTIONAL) Enter the keyword connected to specify that
connected routes are distributed.
isis (OPTIONAL) Enter the keyword isis to specify that IS-IS
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
rip (OPTIONAL) Enter the keyword rip to specify that RIP
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
1254
Open Shortest Path First (OSPFv2 and OSPFv3)