Service Manual

NOTE: If you are authorized for the EXEC Privilege mode by your role, you do
not need to enter an enable password.
Related
Commands
enable password — configures a password for the enable command and to
access a privilege level.
role
Changes command permissions for roles.
Syntax role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
Enter one of the following keywords as the mode for which
you are controlling access:
configure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
addrole Enter the keyword addrole to add permission to the
command. You cannot add or delete rights for the sysadmin
role.
deleterole
Enter the keyword deleterole to remove access to the
command. You cannot add or delete rights for the sysadmin
role.
role-name Enter a text string for the name of the user role up to 63
characters. These are 3 system defined roles you can
modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default
for that command.
command Enter the command’s keywords to assign the command to a
certain access level. You can enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Security
1643