Service Manual

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell(conf-if-vrid-4)#show config
vrrp-group 4
virtual-address 119.192.182.124
!
show vrrp
View the VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns No
Active VRRP group.
Syntax
show vrrp [vrrp-id][brief][interface type][ipv6][interface type][vrf
vrf-name]
Parameters
vrrp-id (OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to
view only that group. The range is from 1 to 255.
brief (OPTIONAL) Enter the keyword brief to view a table of information
on the VRRP groups.
interface type (OPTIONAL) Enter the following keywords and slot/port[/subport] or
number information:
• For Port Channel interface types, enter the keywords port-
channel then the number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
• For a VLAN interface, enter the keyword vlan then the VLAN ID.
The VLAN ID range is from 1 to 4094.
ipv6 (OPTIONAL) Enter the keyword ipv6 to view only VRRP IPv6 groups.
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to
view active VRRP groups corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Virtual Router Redundancy Protocol (VRRP)
1873