Service Manual

show qos dcb-buffer-threshold
Displays the DCB buffer threshold assigned to a QoS policy. This command is supported on the platform.
Syntax
show qos dcb buffer-threshold {name}
Parameters
name Enter the name of the profile, which can be a string of up to
32 characters in length.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S6000 platform.
Usage Information The following table describes the output fields displayed for the show command:
Field Description
Name Name of the DCB buffer threshold
profile
Buffer threshold parameters Buffer size allocated for the PFC
priority queue and the priority of the
queue
Example
Dell#show qos dcb buffer-threshold
Name : test1
Buffer threshold parameters:
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
dcb pfc-total-buffer-size
Configure the total buffer size for PFC in kilobytes. This utility is supported on the S6000 platform.
Syntax
dcb pfc-total—buffer—size KB
Parameters
KB Enter a number in the range of 0 to 7787.
600
Data Center Bridging (DCB)