Service Manual

1.1.1.1/32 0 1 0 00:00:00:00:00:00 CP
1.1.1.0/24 0 1 0 00:00:00:00:00:00 CP
Dell#
Example (ECMP-
Group)
Dell#show ip cam stack-unit 3 po 0 ecmp-group detail
Destination EC C VId Mac-Addr Port ECMP Group-Index
-------------------------------------------------------------------------------------------
1.1.1.2/32 0 0 1000 00:01:00:00:00:02 Te 3/42 -
2.1.1.2/32 0 0 20 00:03:00:00:00:02 Po 10 -
2.1.1.1/32 0 1 0 00:00:00:00:00:00 CP -
1.1.1.1/32 0 1 0 00:00:00:00:00:00 CP -
2.1.1.0/24 0 1 0 00:00:00:00:00:00 CP -
1.1.1.0/24 0 1 0 00:00:00:00:00:00 CP -
100.1.1.0/24 1 0 20 00:03:00:00:00:02 Po 10 0
100.1.1.0/24 1 0 1000 00:01:00:00:00:02 Te 3/42 0
0.0.0.0/0 0 1 0 00:00:00:00:00:00 CP -
Dell#
Example (Member-
Info)
Dell#show ip cam stack-unit 3 po 0 ecmp-group member-info detail
Group Index Member Count Mac-Addr Port VLan ID
--------------------------------------------------------------------------------
0 2 00:03:00:00:00:02 Po 10 20
00:01:00:00:00:02 Te 3/42 1000
Dell#
show ip fib stack-unit
View all Forwarding Information Base (FIB) entries of a specific stack-unit.
Syntax
show ip fib stack-unit id vrf vrf-name [ip-address [mask] [longer-prefixes] | summary]
Parameters
id Enter the S-Series stack unit ID. The unit ID range is from 1 to 6.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view FIB entries corresponding to that VRF.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only information on that destination. Enter the IP
address in dotted decimal format (A.B.C.D). Enter the mask in slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common prefix.
summary (OPTIONAL) Enter the keyword summary to view the total number of prefixes in the FIB.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line
Reference Guide.
932
IPv4 Routing