Administrator Guide

Figure 31. PFC and ETS Applied to LAN, IPC, and SAN Priority Trac
QoS Trac Classication: The service-class dynamic dot1p command has been used in Global Conguration mode to map
ingress dot1p frames to the queues shown in the following table. For more information, refer to
QoS dot1p Trac Classication and Queue
Assignment.
The following describes the dot1p-priority class group assignment
dot1p Value in
the Incoming
Frame
Priority Group Assignment
0 LAN
1 LAN
2 LAN
3 SAN
4 IPC
Data Center Bridging (DCB) 291