Administrator Guide

3 vty 1 10.14.1.97

4 vty 2 10.14.1.97

5 vty 3 10.14.1.97

Kill existing session? [line number/Enter to cancel]:

Enabling Secured CLI Mode

The secured CLI mode prevents the users from enhancing the permissions or promoting the privilege levels.

• Enter the following command to enable the secured CLI mode:

CONFIGURATION Mode

secure-cli enable

After entering the command, save the running-conguration. Once you save the running-conguration, the secured CLI mode is enabled.

If you do not want to enter the secured mode, do not save the running-conguration. Once saved, to disable the secured CLI mode, you

need to manually edit the startup-conguration le and reboot the system.

Log Messages in the Internal Buer

All error messages, except those beginning with %BOOTUP (Message), are log in the internal buer.

For example, %BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled

Conguration Task List for System Log Management

There are two conguration tasks for system log management:

• Disable System Logging

• Send System Messages to a Syslog Server

Disabling System Logging

By default, logging is enabled and log messages are sent to the logging buer, all terminal lines, the console, and the syslog servers.

To disable system logging, use the following commands.

• Disable all logging except on the console.

CONFIGURATION mode

no logging on

• Disable logging to the logging buer.

CONFIGURATION mode

no logging buffer

• Disable logging to terminal lines.

CONFIGURATION mode

no logging monitor

• Disable console logging.

CONFIGURATION mode

no logging console

Management