Administrator Guide
• Dell Networking enterpriseSpecic environment traps — fan, supply, and temperature.
• Dell Networking enterpriseSpecic protocol traps — bgp, ecfm, stp, and xstp.
To congure the system to send SNMP notications, use the following commands.
1 Congure the Dell Networking system to send notications to an SNMP server.
CONFIGURATION mode
snmp-server host ip-address [traps | informs] [version 1 | 2c |3] [community-string]
To send trap messages, enter the keyword traps.
To send informational messages, enter the keyword informs.
To send the SNMP version to use for notication messages, enter the keyword version.
To identify the SNMPv1 community string, enter the name of the community-string.
2 Specify which traps the Dell Networking system sends to the trap receiver.
CONFIGURATION mode
snmp-server enable traps
Enable all Dell Networking enterprise-specic and RFC-dened traps using the snmp-server enable traps command from
CONFIGURATION mode.
Enable all of the RFC-dened traps using the snmp-server enable traps snmp command from CONFIGURATION mode.
3 Specify the interfaces out of which Dell Networking OS sends SNMP traps.
CONFIGURATION mode
snmp-server trap-source
Example of RFC-Dened SNMP Traps and Related Enable Commands
The following example lists the RFC-dened SNMP traps and the command used to enable each. The coldStart and warmStart traps are
enabled using a single command.
snmp authentication SNMP_AUTH_FAIL:SNMP Authentication failed.Request with invalid community
string.
snmp coldstart SNMP_COLD_START: Agent Initialized - SNMP COLD_START.
SNMP_WARM_START:Agent Initialized - SNMP WARM_START.
snmp linkdown PORT_LINKDN:changed interface state to down:%d
snmp linkup PORT_LINKUP:changed interface state to up:%d
Enabling a Subset of SNMP Traps
You can enable a subset of Dell Networking enterprise-specic SNMP traps using one of the following listed command options.
To enable a subset of Dell Networking enterprise-specic SNMP traps, use the following command.
• Enable a subset of SNMP traps.
snmp-server enable traps
NOTE
: The envmon option enables all environment traps including those traps that are enabled with the envmon
supply, envmon temperature, and envmon fan options.
Example of Dell Networking Enterprise-specic SNMP Traps
envmon
CARD_SHUTDOWN: %sLine card %d down - %s
CARD_DOWN: %sLine card %d down - %s
LINECARDUP: %sLine card %d is up
Simple Network Management Protocol (SNMP)
867