Service Manual

Table Of Contents
Field Description
IPSecv6 policy
name
Name of the IPsec security policy applied to the interface.
inbound/
outbound ah
Authentication policy applied to inbound or outbound traffic.
inbound/
outbound esp
Encryption policy applied to inbound or outbound traffic.
spi Security policy index number used to identify the policy.
transform Security algorithm that is used to provide authentication, integrity, and confidentiality.
in use settings Transform that the SA uses (only transport mode is supported).
replay detection
support
Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS ACTIVE: The authentication or encryption policy is enabled on the interface.
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary |
grace-lsa]
Parameters
process-number
Enter the OSPF process number.
vrf
vrf-name
(Optional) Enter the keyword vrf followed by the name of the VRF to display
neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors corresponding to the
default VRF are displayed.
database-
summary
(OPTIONAL) Enter the keywords database-summary to view a summary of
database LSA information.
grace-lsa
(OPTIONAL): Enter the keywords grace-lsa to display the Type-11 Grace LSAs
sent and received on an OSPFv3 router.
Defaults None
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Added support for OSPFv3 on the S4810 and Z9000.
8.4.2.2 Added support for the display of graceful restart parameters and Type-11 Grace
LSAs on E-Series routers.
1060 Open Shortest Path First (OSPFv2 and OSPFv3)