Service Manual

Related
Commands
● rate shape — shapes traffic output as part of the designated policy.
● qos-policy-output — creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S4048–ON
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input policy-
map-name [layer2] command.
Parameters
policy-map-name Enter the name for the policy map in character format (32 characters maximum).
You can identify an existing policy map or name one that does not yet exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is Layer 3.
Defaults Layer 3
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Expanded to add support for Layer 2.
6.1.1.1 Introduced on the E-Series.
Usage
Information
You can attach a single policy-map to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
NOTE: The service-policy commands are not allowed on a port channel. The service-
policy input policy-map-name command and the service-class dynamic dot1p
command are not allowed simultaneously on an interface. However, the service-policy input command
(without the policy-map-name option) and the service-class dynamic dot1p command are allowed on
an interface.
Related
Commands
● policy-map-input — creates an input policy map.
1152 Quality of Service (QoS)