Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1271

Table Of Contents

dot1x reauth-max

Configure the maximum number of times a port can re-authenticate before the port becomes unauthorized.

Syntax

dot1x reauth-max number

To return to the default, use the no dot1x reauth-max command.

Parameters

number

Enter the permitted number of re-authentications. The range is from 1 to 10. The

default is 2.

Defaults 2

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the C-Series and S-Series.

7.4.1.0 Introduced on the E-Series.

dot1x server-timeout

Configure the amount of time after which exchanges with the server time-out.

Syntax

dot1x server-timeout seconds

To return to the default, use the no dot1x server-timeout command.

Parameters

seconds

Enter a time-out value in seconds. The range is from 1 to 300, where 300 is

implementation dependant. The default is 30.

Defaults 30 seconds