Service Manual

Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
If you reject the EULA, the data is not transmitted to the SupportAssist server.
Related
Commands
● eula-consent — accept or reject the EULA.
support-assist activate
Enable the SupportAssist service.
Syntax
support-assist activate
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
You are guided through a series of queries to configure SupportAssist. The generated commands are
added to the running configuration, including the DNS resolve commands, if configured.
This command starts the configuration wizard for the SupportAssist. At any time, you can exit by entering
Ctrl-C. If necessary, you can skip some data entry.
support-assist activity
Trigger an activity event immediately.
Syntax
support-assist activity {full-transfer} start now
Parameters
full-transfer Enter the keywords full-transfer to specify transfer of configuration,
inventory, logs, and other information.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
SupportAssist Commands
Dell Networking OS supports the following SupportAssist mode commands.
SupportAssist
1409