Service Manual

activity
Move to the SupportAssist Activity mode for an activity. Allow the user to configure customized details for a specific activity.
Syntax
activity {activity-name}
To remove all customized detail for a specific activity, use the no activity {activity-name}
command.
Parameters
activity-name
Enter one of the following keywords:
● Enter the keywords full-transfer to specify transfer of configuration,
inventory, logs, and other information.
Command Modes SUPPORTASSIST
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
By default, each activity follows a set of default actions using a default schedule. Using this command,
you can customize the set of actions and disable a certain activity.
contact-company
Configure the contact information for the company.
Syntax
contact-company name {company-name}[company-next-name] ... [company-next-
name]
To remove the contact company information, use the no contact-company command.
Parameters
company-name Enter the name for the company. If there are multiple words in the name, use
optional additional fields.
company-next-
name
(OPTIONAL) Enter the next components of the company name, up to 5
components are allowed.
Command Modes SUPPORTASSIST
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
You can configure only one contact-company.
It is not possible to remove the components of the company name. The no form of the command removes
the entire contact-company entry.
This command is optional for SupportAssist service configuration.
1410 SupportAssist