Service Manual

no-contact Enter the keywords no-contact to specify that there is no preferred method.
phone Enter the keyword phone to specify phone as preferred method.
Defaults no-contact
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Related
Commands
● email-address — configure email addresses to reach the contact person.
● phone — configure phone numbers to reach the contact person.
time-zone
Configure the time zone for contacting the person.
Syntax
time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]
To remove the time zone, use the no time-zone [zone | start-time | end-time] command.
Parameters
zone +-HH:MM Enter the keyword zone then a time difference from GMT expressed as HH:MM.
This number may be preceded by either a + or – sign.
start-time
HH:MM
Enter the keywords start-time then a starting time expressed as HH:MM. Use
the 24-hour clock format.
stop-time
HH:MM
Enter the keywords stop-time then a stopping time expressed as HH:MM. Use
the 24-hour clock format.
Command Modes SUPPORTASSIST PERSON
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
This command is optional for SupportAssist service configuration.
SupportAssist Server Commands
Dell Networking OS supports the following SupportAssist Server mode commands.
proxy-ip-address
Configure a proxy for reaching the SupportAssist remote server.
Syntax
proxy-ip-address {ipv4-address | ipv6-address} port port-number [ username
userid password [encryption-type] password ]
1418 SupportAssist