Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1461

Table Of Contents

ip http vrf

Configure an HTTP client with a VRF used to connect to the HTTP server.

Syntax

ip http vrf {management | vrf-name}

To undo the HTTP client configuration, use the ip http vrf command.

Parameters

management Enter the keyword management for configuring the management VRF that uses

an HTTP client.

vrf-name

Enter a VRF name that the HTTP client uses. If you do not specify a VRF name, the

HTTP client uses the default VRF.

Defaults Disabled

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.

Usage

Information

To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP client uses the VRF

name that you specify to reach the HTTP server. If you do not specify a VRF name, the HTTP client uses

the default VRF.

description

Specify a name for a customer VRF.

Syntax

description string

To delete the descriptive name for a customer VRF, use the no description string command.

Parameters

string

Enter a descriptive name for the VRF.

Defaults None.

Command Modes VRF MODE