Service Manual

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage
Information
It is possible to configure multiple import conditions per VRF depending on the exporting VRF.
The export-target and import-target support only the match the protocol and prefix-list options. Other
options that you configure in the route-maps are ignored.
Related
Commands
● ipv6 route-export — exports IPv6 routes to another VRF.
match source-protocol
Specify matching source-protocol criteria while exporting or importing routes.
Syntax
match source-protocol {bgp | isis | ospf | connected | static}
Parameters
bgp Enter the keyword bgp to leak or share routes corresponding to the BGP protocol.
isis Enter the keyword isis to leak or share routes corresponding to the ISIS protocol.
ospf Enter the keyword ospf to leak or share routes corresponding to the OSPF
protocol.
connected Enter the keyword connected to leak or share connected routes corresponding
to the VRF.
static Enter the keyword static to leak or share static routes corresponding to the
VRF.
Command Modes ROUTE MAP MODE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage
Information
Specify the matching criteria only after defining a route-map. Before using this command, you must enter
Route Map mode using the route-map route-map-name command. The match criteria that you
specify is associated with the route-map that you define.
The export-target and import-target options support only the match protocol and match prefix-list
options. Other options that you configure in the route-maps are ignored.
Related
Commands
● ipv6 route-import – imports IPv6 routes from another VRF.
Virtual Routing and Forwarding (VRF) 1473