Service Manual

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-
Mux (PMUX) mode only.
show vlt private-vlan
Display the private VLAN (PVLAN) associated with the VLT LAG for VLT peer nodes.
Syntax
show vlt private-vlan
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S6000.
9.3(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a part of the
primary VLAN and its associated secondary VLANs, similar to the behavior for normal trunk ports. VLAN
symmetry is not validated if you associate an ICL to a PVLAN.
Similarly, if you dissociate an ICL from a PVLAN, although the PVLAN symmetry exists, ICL is removed
from that PVLAN. The ICL Status field displays the type of VLAN port of the VLTi link configured in a
PVLAN.
Example
Dell#show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T – tagged, *
- VLT Pvlan
Primary Secondary ICL Status
10 V (*)
20(C) V
30 (I) V
Virtual Link Trunking (VLT) 1503